![]() ![]() ![]() In the DietPi menus, navigate to Software Optimized – Select DietPI optimized sogtware for installation and then to 47 OwnCloud: your very own cloud (eg: dropbox). Once DietPi has rebooted and you’ve logged back in, you’ll be able to install new software – and that’s exactly what we’re going to do. Wait that out and then hit enter to reboot. It’s your first time logging in, so DietPi will update automatically. Log in with the username root and the password dietpi (you can do this on the Raspberry Pi itself or just SSH in from another computer). We’re going to need that, so go ahead and write it down. DietPi should print out your IP address even before you log in. With DietPi on the microSD card and your Pi connected to the internet via Ethernet cable, go ahead and boot up. Step 2: Write down your IP address and log into DietPi Grab the disk image here, unzip it with the program of your choice (7-Zip will work), and then write the disk image to your microSD card with the program of your choice (Win32 Disk Imager on PC and Disk Utility on Mac will both work). Your DietPi installation process is the same as with most other Raspberry Pi operating systems. Step 1: Install DietPi on your Raspberry Pi Then we’re going to use ownCloud that works on DietPi. We’re going to install DietPi, a super-lightweight operating system for the Raspberry Pi. You’ll need all the usual stuff plus an Ethernet cable and an external storage device (optional, but recommended – if you’re going to set up ownCloud, you might as well give yourself plenty of storage space). You’re reading The Pi, so you know where this is going: we’re going to use a Raspberry Pi. You’ll just need some storage (like an external hard drive) and a device. You’re more than capable of replicating these services on your own. But you don’t necessarily have to pay money to get reliable cloud storage – and you don’t necessarily have to trust giant companies like Apple with all of your private files. You can turn to services like DropBox or cloud services from major companies like Apple and Google. There are plenty of ways to get cloud storage. How to set up a Raspberry Pi ownCloud server Here’s how to set up a Raspberry Pi ownCloud server. Sounds great, right? So how do you do it? We have you covered. ![]() ownCloud is one of the best programs for running a cloud storage system on your Raspberry Pi, and with the help of it and DietPi, it’s easy for any Pi user to have their files at their fingertips anywhere they go. And, thanks to ownCloud, even those of us who don’t trust big companies with our data can enjoy the convenience of cloud storage. *I am talking about system backup your shares and Data will not be impacted by the process anyway thanks to FOXĮxample mkdir /DataVolume/shares/wdoriginalĭd if=/dev/sda5 conv=sync,noerror bs=64K of=/DataVolume/shares/wdoriginal/kernal.imgĭd if=/dev/sda7 conv=sync,noerror bs=64K of=/DataVolume/shares/wdoriginal/config.imgĭd if=/dev/md0 conv=sync,noerror bs=64K of=/DataVolume/shares/wdoriginal/rootfs.You don’t need us to tell you that cloud storage is a very useful thing. One piece of advice if you want to try Clean Debian or OMV and not sure you want to keep the themīack up your old system and configs so you can revert back everything easly if you need to (Also you can try “rSync” and “Backup” plugins)įor save all settings - just backup main config (/etc/openmediavault/config.xml) and restore it after upgrade. HFS+ supported too (Add “hfsplus” to /etc/modules first)įor 2nd question - use “Usb backup” plugin. (One-way sync possible too, i think)įor Timemachine - install “openmediavault-netatalk” plugin from “Plugins” section. ![]()
0 Comments
Leave a Reply. |